Close up picture of the hard plastic screw nut that tightens your umbrella pole into position, the stem is metal for strength.
50cm x 50cm Monza umbrella base, weighs 35kg to provide a stable base for your umbrella, up to 3m diameter, the pole can be 40mm diameter, up to 50mm diameter
Top view of the umbrella stem featuring the screw nut and innovative adapters that are removed to fit your umbrella pole into the stem snugly.
Top view of the umbrella stem with the smaller adapters removed, to allow a 50mm pole, the umbrella canopy should not be wider than 3m diameter to safeguard the umbrella from blowing over
**IN STORE PICK UP ONLY - CANNOT BE DELIVERED - IN STORE PICK UP ONLY**
Our 35kg umbrella base is made from concrete, finished with a durable plastic outer sleeve. Available in black as pictured. The base has large plastic feet and 2 grab handles on the top. It is supplied with an integrated metal shaft to accept the umbrella pole from 40cm diameter to 50cm diameter.
The metal stem provides strength, the hard plastic screw nut will tighten the stem against your umbrella pole.
Ideal for use with all our outdoor umbrellas up to 3.0m dia, or umbrellas used in high wind areas.
The umbrella stem has adaptors that you remove to ensure your pole can fit into it, ideal for umbrellas that have poles which are 38mm up to 50mm in diameter!
• Plastic tube 20cm H
• 2 x grab handles
• slimline design
• large plastic feet
• tightening screw
• 35kg weight
• Dimensions on ground 50x50x7cm H
12 month return to base warranty for domestic use only. Excludes reasonable wear and tear, misuse or abuse.
No one has reviewed this product!
Write a Review
